Cart
0
Product
Products
(empty)
No products
To be determined
Shipping
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total shipping
To be determined
Total
Reduced price!
View larger
View larger
UL 1446A OUTLINE
New product
UL 1446A OUTLINE 1st Edition, January 30, 2018 UL Outline for Investigation Dry Type Transformer Insulation Systems Rated Above 1 kV
More info
Description / Abstract:
These requirements cover test procedures used in the evaluation of Class 120(E) or higher rated electrical insulation systems (EIS) with operating voltages of 1 kV and above for use in; open wound, cast coil, resin encapsulated and pre-preg flexible sheet rolled, dry-type high-voltage transformers where the thermal factor is the dominating aging factor and where transient over-voltages or partial discharge may be present.
This outline is intended to evaluate a single EIS and establish a Voltage Stress Level (VSL) for the various insulation functions tested such as turn-to-turn, layer-to-layer, section-to-section, coil-to-coil and coil-to-ground. An EIS established under this outline is suitable for all transformers constructed with this EIS such that the design maintains the insulation thickness at or below the tested VSL values.
These requirements for the evaluation of an EIS do not establish thermal ratings for/or alter established thermal ratings for individual components.
These requirements do not cover insulation systems exposed to radiation or operating in oils, refrigerants, soaps, or other media that potentially degrade insulating materials.
When any performance aspect of an end-product requirement is not covered by this outline, the applicable standard shall be used.
This outline is intended to evaluate a single EIS and establish a Voltage Stress Level (VSL) for the various insulation functions tested such as turn-to-turn, layer-to-layer, section-to-section, coil-to-coil and coil-to-ground. An EIS established under this outline is suitable for all transformers constructed with this EIS such that the design maintains the insulation thickness at or below the tested VSL values.
These requirements for the evaluation of an EIS do not establish thermal ratings for/or alter established thermal ratings for individual components.
These requirements do not cover insulation systems exposed to radiation or operating in oils, refrigerants, soaps, or other media that potentially degrade insulating materials.
When any performance aspect of an end-product requirement is not covered by this outline, the applicable standard shall be used.