Cart
0
Product
Products
(empty)
No products
To be determined
Shipping
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total shipping
To be determined
Total
Reduced price!
View larger
View larger
IEEE C50.13
New product
IEEE C50.13 2014 Edition, March 27, 2014 Cylindrical-Rotor 50 Hz and 60 Hz Synchronous Generators Rated 10 MVA and Above
More info
Description / Abstract:
The requirements in this standard apply to all 50 Hz and 60 Hz,
two-pole and four-pole, cylindrical-rotor synchronous generators
driven by steam turbines and/or by combustion gas turbines.
The drive may be direct or through a gearbox or other device that permits different speeds for the turbine and the generator. The generators covered by this standard are to have rated outputs of 10 MVA and above. Cylindrical-rotor, two-pole and four-pole generators below this rating are generally covered by NEMA MG 1 [B19].1
Purpose
The purpose of this standard is to establish a base set of accepted requirements for 50 Hz and 60 Hz cylindrical-rotor electrical generators above 10 MVA driven by steam turbines or combustion turbines that can be used in the specification of a new generator. It is also intended that the standard provides guidance
1The numbers in brackets correspond to those of the bibliography in Annex A.
The drive may be direct or through a gearbox or other device that permits different speeds for the turbine and the generator. The generators covered by this standard are to have rated outputs of 10 MVA and above. Cylindrical-rotor, two-pole and four-pole generators below this rating are generally covered by NEMA MG 1 [B19].1
Purpose
The purpose of this standard is to establish a base set of accepted requirements for 50 Hz and 60 Hz cylindrical-rotor electrical generators above 10 MVA driven by steam turbines or combustion turbines that can be used in the specification of a new generator. It is also intended that the standard provides guidance
1The numbers in brackets correspond to those of the bibliography in Annex A.